1 / 7
Audio Technica AT2020 Cardioid Condenser Microphone Desk Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom desk stand for the Audio-Technica AT2020 microphone, designed for stability and a clean setup.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a custom-designed desk stand for the Audio-Technica AT2020 cardioid condenser microphone. The stand provides a stable and compact solution for desk use, making it ideal for recording, streaming, or video calls without needing a boom arm.
Print Settings
- Material: PLA
- Nozzle Size: 0.4mm
- Layer Height: 0.20mm (Standard Preset)
- Infill: 15-20%
- Supports: Required (Tree, Auto)
- Threshold Angle: 30°
- First Layer Density: 90%
- First Layer Expansion: 2mm
- On Build Plate Only: Yes
- Remove Small Overhangs: Yes
The design was tested on an Ender 3 V3 SE and printed successfully with these settings. Feel free to modify for your needs.
This was the first full custom project I've uploaded any feedback would be appreciated.
Thanks.