1 / 5
Case for an UPS 18650 3A 15W Type C plus MT3608 booster module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protection case for an UPS and a booster module, including a switch and a dual USB A/C output connector
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to power a Raspberry Pi from this UPS and find out that the output voltage was only 4,9 V.
So I had to add a booster module (MT3618) to get 5.1 V.
I added a switch and an output connector (dual USB A/C)
Printed in PLA
Additional hardware: Brass inserts M2x4x3.5 and screws M2x12.