1 / 5
Case for an UPS 18650 3A 15W Type C plus MT3608 booster module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protection case for an UPS and a booster module, including a switch and a dual USB A/C output connector
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 20
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to power a Raspberry Pi from this UPS and find out that the output voltage was only 4,9 V.
So I had to add a booster module (MT3618) to get 5.1 V.
I added a switch and an output connector (dual USB A/C)
Printed in PLA
Additional hardware: Brass inserts M2x4x3.5 and screws M2x12.