Mean Well LRS - 150 Power Supply case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case with base and cover for the model Mean Well LRS - 150 power supply
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This is a case entirely designed by me for the Mean Well LRS 150.
It has some spare space in front for some cable management, you can fix the Mean to the case using 3 screws on the side and one on the bottom, all M3 screws.. The case is kept close by 6 screws , the size is M3. You should add the brass insert threaded in the base.
It has enough ventilation holes and the part with connection is covered for safety reason.
Additionally you can block the cables entering in the front with the constraints, using 4 small screws. Holes for the front cables are 10mm diameter.
UPDATE: I've added new version with few modification: the hole for the V12 output is slightly smaller ( 8mm diameter and also the constrainer is adjusted and will fit better. Also i removed the hexagonal and replaced them with some open lines, which makes the structure a bit harder and easier for printing. This model is about 15 mm smaller that the original, closing the top with 4 screws instead of 6..
N.B. for the cable holder, you'll find 4 pieces: you have for both sizes ( 10 and 8 mm )two options, you can choose whether the one with more rounded shapes or less rounded, both are working, is just a matter of taste.