Dyson V8/V10/V11/.... Tool Head Mounts for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach Dyson V8, V10, and V11 tool heads to your Honeycomb Storage Wall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
Remix of the Honeycomb Storage Wall for Dyson tool heads. Three sizes provided to accommodate different clearance requirements from the wall.
You will need to print M3 nut inserts, have nuts for it.
Compatibility
Dyson Models: V8, V10, V11.
Tool Heads:
Large: Motorized roller (pet hair removal). Requires significant clearance.
Small/Medium: Crevice tool, multi-tool. Use Small or Medium based on desired clearance.
Mounting: Attaches to Honeycomb Storage Wall using M3x10 screws.
Print Settings
Material: PETG recommended.
Perimeters: 3 (walls).
Infill: 15%.
Layer Height: 0.25mm.
Supports: Not required for Small/Medium. Optional for Large due to overhangs, though it prints fine without them.