Liczymy pasujące modele…
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
Wydruk około 22,85 €–27,93 € nettoWstępna wycena jednego wariantu
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
I made this because why not it may be very large scale to what you want 0-100% infill use supports Category: Tools
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
This is a slime wand for the Dyson V8 vacuum. The original is great, but it is too thick for vacuuming between my car seats. I am sure you can find other uses too! Print instructions Category: Household Summary This is a slime wand for…
Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…
Reverse-engineered this backend filter attachment piece for my Dyson V8 vacuum. More information on my website: https://dragonmountaindesign.com/2023/10/08/dyson-v8-backend-filter-attachment-replacement-part/ Direct link to Onshape model:…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
Last year I modified my laptop to support an external graphics card using the EXP GDC Beast (v8.3 in my case) adapter, allowing me to play relatively modern games when away from my main rig. Rather than have the card exposed, I designed…
This was idea was brought to us from a community member and we loved it we're making it happen. Tons of things I want to add. - PSU underneath powering everything. - piston fans - valve covers - intake manifold - probably more
V8 Engine Mug Infill: 10% gyroid Supports: tree Threshold angle: 40% Layer: 0.12
This is an Engine Stand extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The mounting holes are already present on the engine block. Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no…
I recently bought a Dyson V8 and noticed the amount of air that comes out of the air filter while vacuuming. I have been contemplating buying a battery powered air duster and this got me thinking an adapter would make the Dyson V8 a…
I modified the SpoolHolder_v8 so I could use wider spools such as Amazon Basics brand. Print Settings Printer: FlashForge Adventurer 3 Rafts: Doesn't Matter Supports: No Category: 3D Printer Parts
Saves ~3,8g compared to og base, my one is about 2,9g after messing with the print settings. The screw placements and other are not exactly right but the pcb will fit U can use the design however you want but no selling
Adapted the gap size for accessory parts with electric connection. Adapted the hole to fit my drill bit
EN: Conversion kit for Lima V80 002 (201625L): NEM coupler adapter and decoder holder fits for ESU Adapterplatine 21MTC (51967) DE: Umbaukit für Lima V80 002 (201625L): NEM Kupplungadapter und Decoderhalter passend für ESU Adapterplatine…
The Cooling solution is based on Driverboards for DRV8825/A4988 and a centrifugal blower Blower https://de.aliexpress.com/item/32832503095.html Stepper Driver connection Board https://de.aliexpress.com/item/32848685464.html Everything…
I'm assembly a tool in the Stealth changer ecosystem, and i encountered an interference in the original mounting point that i solved with this offset standoffs. You can use this in case your building a tool with: Orbiter v2 Drangon burner…
Ford V8 Cherry MX Keycap printed with Blue and White
What it is The printed airframe from Phase 1 of Project Cheap Drone: a 3-inch toothpick quad that weighs 164 g all-up. That is under 250 g, so it does not need FAA registration. Flown line of sight. In this download Frame v8: body, arms,…
u wish to see what happens at the nozzle output, but the original light is to weak... here my way to fix this
2026-May-20: I added a 2 wire, 3 wire and 4 wire comb object. 2026-Apr-23: I added an additional style (B version) of the center loom. It's designed for wire routing OVER the rear of the valve covers. This new style does not need the…
I made this because why not it may be very large scale to what you want 0-100% infill use supports Category: Tools
I needed a tray to organize my valvetrain and didnt want to buy one...super simple design simply made to org intake and exhaust valves and springs. These measurements are specifically for an LS1 but will work for plenty of other motors.…
Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…
Merged Sherpa Micro - ECAS + Switch, with Sherpa Micro R2RC2 housing_core_x1_rev8.stl which accepts the RIDGA v2 gear. Prints flat on buildplate without supports.
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
I liked/needed to use VOID's remix of HammerSpb's Dragon Burner Ender 3 mount, but also keep using my BLtouch, which isn't supported in VOID's remix. So i reimplemented the BLtouch support in VOID's model. I haven't actually printed this…
This model makes the Ender 3 hotend compatible with the Dragon Burner toolhead by Chirpy2605. My hotend uses a Copperhead heat break from slice engineering, which adds 1 mm to the length of the hotend. So i have made in total four…
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…
Use this to integrate your new Luke's Lab Chube Compact with your Dragon Burner V8 setup. Supports Top rails only at the moment. You just need to new hotend adapter and the spacers, everything else can be reused! Print with standard Voron…
Printed in ASA using 6 walls and 60% Gyroid infill. Hardware is 2 M3 heatset inserts and 2 M3 25mm screws.
I created this model for E7 because the original toolhead was no longer suitable for me. I used a Bambu Lab X1C hotend and a BL touch, which is integrated into the holder, so it doesn't take up space next to it. But it's an experiment,…
This is a custom made wall mount for the Lego Speed Champions BMW M V8 Hybrid LMdH Hypercar. It holds the car with the wheels to the wall and the rear wing up. I have found that command strips work best for this, by attaching 2 velcro…
V8 Engine Mug Infill: 10% gyroid Supports: tree Threshold angle: 40% Layer: 0.12
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
Stronger locking system, better tolerances for Bambu Lab X1C (printed with PLA-CF). EDIT 18/12/2025: Tighter collar Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C Rafts: No Supports: Yes Filament: Bambu Lab PLA-CF Black…
This model is for people who don't want to invest too much time but want a strong cfd tested part cooling solution. This model also keeps the original bltouch mount with only a +3mm y offset from the hotend. It works for the stock ender 5…
u wish to see what happens at the nozzle output, but the original light is to weak... here my way to fix this
The top part now connects directly to the Dyson wall mount and the bottom part increases attachment storage. Bolt the top facing and bottom facing parts together (M4 bolt and nut) and connect it directly to the Dyson V8 wall mount. This…
I changed the model to fit a Dragonburner upgrade on my ender5 plus carriage mount. V3 added strength and 2 additional bolts , just need to drill stock carriage plate to accept 2 exsta bolts. Its printed with 0.2mm height, 4 mm width and…
This V8 bracelet is designed for people who live and breathe horsepower. The detailed V8 engine centerpiece , featuring pistons, cylinders, and bold V8 lettering, is a clear tribute to raw power, engine sound, and performance culture.…
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
(english below) Universeller Halter für den Sensor der Außentemperaturanzeige passend für Audi 80 / 90 (B3, B4), Cabriolet/Coupe (Typ89), Audi 100 (C3 Typ44, C4), Audi 200 (C3 Typ44), Audi V8 (D11) und weiteren Modellen. Vergleichsnummer…
a nice keychain for the car maniacs I also have an I4 on my page it's print in place no moving parts
Ich habe es mir zu aufgabe gemacht einen V8 Motor zu Bauen da die Einzylinder variante schon recht gut bei mir funktioniert hat und ich eben einfach mehr haben wollte, erst recht den geilen Sound. Als erstes vorweg, es wurden von Tom…
Summary This project provides printable negative holders for Epson range of flatbed scanners with transparency support, namely: v700, v750, v800 and v850. The main objectives of this project are: to allow for easy and precise negative…
SO HERE IT IS!!! 1/5 scale 3V8! Now that I’ve printed it, I had some problems and wanted to do an early access release of the model to see if others have the same issues. I’ve been working on this for about 2 months with (themodel2t),…
This is a 3D Printable Model of a V8 Engine. Assembly Instructions Step 1: Preparation & Post-Processing Before assembly, ensure the following for all printed parts: Clearance Check: Sand the PistonHead outer walls and the EngineBlock…
I made @DanielJ_2100544's Charging stand for vacuum Fanttik Slim V8 Apex but wanted to have the charger connect when the vacuum is put in the holder rather than having to manually plug it it. The placement of the cable in the original…
Summary These solid motor‑block bricks are designed to snap onto Duplo-elements, giving young builders the visual feel of engines and machines. Their one‑piece construction makes them safe, sturdy, and ideal for imaginative play without…
This model is a detailed representation of a classic V-twin engine, originally created as a gift for a professional mechanic. It features a rugged, industrial design complete with a motor oil can and a mounted tire accent. The model…
The Brute in a Tuxedo, Cast in Malice. This is not a car. This is Britain's answer to Armageddon, cast in hand-beaten steel. The Aston Martin V8 Vantage immortalizes the uncompromising, iron-fisted authority of a gentleman who has…
its all the same as kindo's engine but you don't have to copy and paste all the pieces multiple times if you need to print 1 of a part (if 1 flails) go to the original model... or just cut one out
Saves ~3,8g compared to og base, my one is about 2,9g after messing with the print settings. The screw placements and other are not exactly right but the pcb will fit U can use the design however you want but no selling
Dyson v8 cordless vacuum includes a few accessories for different cleaning jobs but without an easy way to organize them close to the charging station. This “base” is placed between the wall and the charging station. It utilizes the…
BTT Knomi 2 and Mellow Halo mount for Chirpy's Dragon Burner v8. Verified to work with DB V8, Dragon HF, and Orbiter v2.
have your lost your Godox "legs"? New one are quite expensive for a piece of plastic, right? Print it! I have added a hole at the back, so you can melt in a screw insert if you want
Mad Max Car- The Original V8 Interceptor - 1979 3D printable model.
This is a simplified model of the Summit Racing SPC Pro LS Engine Block. It's an aftermarket block that can push over 2000 horsepower, which is designed to go in most Chevy sports cars, SUVs, and sedans with the V8 engine. This is my own…
This is a basic V8 emblem that I created for a race car my daughter and I built.
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
A mod to convert a pair of Eachine EV800D FPV goggles into a standalone analog monitor for bench debugging, spectators, or long range builds. Print 1x Top Lid, 1x Bottom, 5x Buttons Requirements EV800D USB-C 12V power supply (designed…
If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 Mini v8 engine, with Fully functional moving pistons, pistons moving up and down when you are rotating the gear. I made it without…
Needed a basic wall mount for my dyson to fit in my closet so i made one. Printed in ABS, 4 walls for rigidity
This is a Crank Pulley remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This remix only applies to the first version of the motor published by EricThePoolBoy. For the latest version, use the remix (two holes)…
Dyson v8 to standard vacuum hose Inner diameter - 32mm Outer diameter - 36mm Slight taper on the inner diameter to provide a snug fit to most hose fittings Modify this to your spec in Onshape…
Honeycomb Flash Grid for Godox V860 III Öffnungswinkel 10°, 20° und 30° The material is PETG | PLA, but you can also choose a different one. Printed with a 0.6mm nozzle and 0.4mm layer height
This is yet another version of the tried and tested dog poop bag holder. What is so special about this one you ask? Well, it's 2 mm smaller and has a little hook on the side to hang the bag full of poop. Now mind you I have a pretty small…
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
Remix of an excellent file to fit the v8 version with Dewalt battery back mod. Does not allow hanging with attached batt
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
This is a modification to the nice DragonBurner v8 toolhead to accomodate the NF Crazy Volcano Hot End. Just the affected parts were posted, and you should download another parts from the original source. You will loose 2mm on Z travel…
Very simple accessory bracket for Dyson vacuum accessories, sized for a large 3M command strip. Fits more-snugly against the wall than other similar models, this bracket is intended for use with non-powered accessories, specifically the…
Express your style with the magic of 3D printing with these Barbie logo keychains. This keychain is designed by us with barbie silhouette. HowToPrint: Recommended layer height: 0,2mm Support: No Number of Walls: 2 Filling: 40% - 100 % for…
Fortnite keychain for lovers of this game. Express your style with the magic of 3D printing with these Fortnite logo keychains. This keychain is designed by us with barbie silhouette. HowToPrint: Recommended layer height: 0,2mm Support:…
After the V6, the V8 is here! Engine style desk organizer / phone holder for car enthusiast. You could scale is you want, if you print it in the original size it fill fits for most phones, like 14 Pro (with UAG case) in the pics. The…
You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files
Mount an Olight Arkfeld flashlight to a Dyson V8 vacuum cleaner.
These engine models were made by Jaxon Kowalenko. I HAVE MADE NO CHANGES TO THE MODELS other than to separate it into 3 files. Please direct ALL praise to the original creator; and if you download my files, PLEASE go give the original…
Printing parameters suggestions: 4 walls, 5 layers top & bottom, 60% infill. Support NOT REQUIRED . BLTouch offsets: X=0, Y=35 (Based on 3D Model) If your BLTouch is slightly bended like mine, please figure out the offsets and reconfigure…
Print it and go. I used lightning infill for speed and it is more than strong enough. The battery fits like a glove.
Designed this in fusion 360 for me to have in my locker at school so i thought i would post it. Open for feedback if you have something you would like to share :)
dieses model soll den dreck aus dem inneren des filter raus pressen
This model is a clip made of paper that can be printed in one piece. It uses an o-spring to open and close. I am currently working on version 9 which will have a stronger spring and more supportive build so be on the lookout.
If you are going to use this model for your own model, make sure the license matches and that you give me credit. This siren uses a 280 DC motor. It should be easy to assemble because it only has 6 parts.
This is a first rendition of the adapter and i have yet to try it out, I would love feedback on what can be made better if someone tries it and finds improvements it needs 4 standard voron m3 heated inserts just like the original and…
Replacement knob for Baofeng UV82 HP Filament: PLA, PETG Layer height: 0,15mm
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
