Goosky S1 Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to ruggedize my S1 so i designed these components.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted to ruggedize my S1 so i designed these components. The components can either be attached using double sided tape or epoxy/CA. The main motor protector is attached to the bottom of the motor with double-sided tape or epoxy/CA. The print orientation shown in the images is necessary to align the layers for optimal strength. the rear motor protector can be bonded to the rear motor stiffener before or after assembly. The holes are aligned such that the screws are still accessible and removable. The parts are made to be thin and frangible so impact energy is dissipated during a crash. I will be adding to these components and revising as I find improvements and solutions.