LightHouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print and files are not for resale and not for commercial use. It would be very much appreciated to consider a tip for…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print and files are not for resale and not for commercial use.
It would be very much appreciated to consider a tip for the design as several hours involved in constructing, then splitting apart.
File and Prints of models not to sell or resale
NEW UPDATES
6 Feb 22 Added glass panel for top piece to be printed in clear filament, super glue in place.
5 Dec 21
New smaller Observation deck added. Original was 227 x 227, New is 220 x 220 to fit the bed size stated from the beginning.
4 Dec 21
New LightHouseTopBody uploaded to reduce amount of center supports. Original required support of whole ceiling. New requires closer to center. About 8-10% threshold what I saw in PrusaSlicer
3 Dec 21
1BodyA, 2BodyD, 3BodyB, 3BodyC, LightHouseTopBody have been updated due to finding an overhang at the bottom inside of each window sill.
A support structure added for LightHouseTopBody and must be imported as a modifier
Multi part split to fit 220mm x 220mm x 220mm build plate. Total build of model is about 1meter.
Battery box for AAA battery case )found on eBay) 25mm x 25mm x 52mm for 5mm LED/s.
Servo is powered from separate 5V source similar to AAA battery case or DC adapter.
May eventually create mount/pocket for second battery case for servo motor into 1stBody. Some parts will require support, but minimal. Recommend Prusa paint on.
Print Settings
Printer:
gMax Xt+ / SunLu S8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
any PLA
any
Category: Decor