LightHouse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print and files are not for resale and not for commercial use. It would be very much appreciated to consider a tip for…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print and files are not for resale and not for commercial use.
It would be very much appreciated to consider a tip for the design as several hours involved in constructing, then splitting apart.
File and Prints of models not to sell or resale
NEW UPDATES
6 Feb 22 Added glass panel for top piece to be printed in clear filament, super glue in place.
5 Dec 21
New smaller Observation deck added. Original was 227 x 227, New is 220 x 220 to fit the bed size stated from the beginning.
4 Dec 21
New LightHouseTopBody uploaded to reduce amount of center supports. Original required support of whole ceiling. New requires closer to center. About 8-10% threshold what I saw in PrusaSlicer
3 Dec 21
1BodyA, 2BodyD, 3BodyB, 3BodyC, LightHouseTopBody have been updated due to finding an overhang at the bottom inside of each window sill.
A support structure added for LightHouseTopBody and must be imported as a modifier
Multi part split to fit 220mm x 220mm x 220mm build plate. Total build of model is about 1meter.
Battery box for AAA battery case )found on eBay) 25mm x 25mm x 52mm for 5mm LED/s.
Servo is powered from separate 5V source similar to AAA battery case or DC adapter.
May eventually create mount/pocket for second battery case for servo motor into 1stBody. Some parts will require support, but minimal. Recommend Prusa paint on.
Print Settings
Printer:
gMax Xt+ / SunLu S8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
any PLA
any
Category: Decor