Socket Snap - Socket Holder/Organizer. 1/4' Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy socket holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Open Community License v1
Socket Snap - Socket Holder/Organizer. 1/4' Drive
A compact and durable 1/4" socket holder designed to keep your sockets organized, secure, and easy to access. The rotating snap-lock clips provide a firm hold during transport while allowing quick socket changes when working. Perfect for toolboxes, workshop storage, garage organization, mobile mechanics, and professional automotive use.
Assembly Instructions
For best results, it is recommended to use a 0.2 mm nozzle on your 3D printer to capture all details, as the parts are relatively small. Minor adjustments may be required depending on your printer settings and tolerances.
Parts Required
1x Base Plate
10x Socket Holders
10x Locking Mechanisms
All parts are designed with a snap-fit assembly and do not require glue or screws.
Assembly Steps.
Print all parts.
Snap the locking mechanisms onto the base plate.
It is recommended to install all mechanisms facing the same direction, as this determines the rotation direction.
Press the socket holders onto the mechanisms.
Align the mechanism pin with the slot in the socket holder before snapping it into place.
The socket is fastned when the holder is parallel to the face and is loose when it is slightly rotated. Thus do not try to force on the socket onto the holder. You will feel the differnce between the “open” and closed position"
Once assembled, the socket holders should rotate and lock securely into position.
If you have any questions or suggestions please reach out!
GOOD LUCK