1 / 2
Unlimited Nozzle Wiper for Qidi Q2, Trash Wiper Replacement — zdjęcie 1
1 / 2

Unlimited Nozzle Wiper for Qidi Q2, Trash Wiper Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A jig, designed for helping you make your own nozzle wiper, wiping result is much cleaner than stock one.

Ocena
5 / 5
Polubienia
37
Pobrania
113
Wydruki
1
Wyświetlenia
1017
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A jig, designed for helping you make your own nozzle wiper, which can be used to replace Q2 trash roller wiper. The wiping result is much cleaner than stock one.

Material

The raw material is 4mm thick silicone bar, ideally 12mm wide. Mine was 15mm wide though. It's pretty cheap, only few bucks for 1 meter long, far enough for life time usage. :)

How to

First of all, cut the silicone bar with the left side jig to a squared shape, 12mmx12mm.

The first vertical cutting is to get the length of 12mm.

The second horizontal cutting is to get the width of 12mm, if your silicone bar is not 12mm wide like mine.

Now we have gotten a 12x12x4mm squared silicone block.

Then, stuff the silicone block into the right side jig to do the final make.

Cut the slots on both side by following jig's cutting slots.

Cut the wiping teeth on the top by following jig's cutting slots. 

Poke it out with a stick through the bottom hole.

We've now gotten a self made trash nozzle wiper for Qidi Q2. Try it! You'll be suprised. :)

Printing Tips

Two files are provided. Each for different cutting blade. The 0.5mm_blade one is recommended for 9mm wide(0.45mm thick) blade cutters, which I was using in the above pictures. 0.75mm one is for wider and bigger cutters, which are using thicker blades.

There is pre-designed printing support, which you could slice it seperately. Cut it first in order to take the support out. Poke through the bottom hole it'll come out from the top.

Video Instruction

【【Qidi起迪Q2】魔改 (三) 自制便便桶(马桶口)硅胶擦嘴块,治具,详解及教程】

https://www.bilibili.com/video/BV1kcdNBpE3s/?share_source=copy_web&vd_source=002192dc6c65bb1e97d4c22f770216b5

Enjoy!

Tagi