Crestline eMTB frame plugs and AXS cable clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU printed parts for a Crestline RS181.2. Plugs for the un-used frame holes and AXS cable clip.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made several parts for a Crestline eMTB RS181.2. Plugs for the unused holes in the frame when using a wireless dropper and wireless shifters (SRAM AXS). There one for two holes and a single. These are best printed in TPU so that is flexible and easily removed.
If you are using the AXS power cable, the wire hangs out exposed. Like a few others have done, I made a tpu clamp that uses the dropout mounts and secures the wires. I used a M4 25mm screw and washer with a nylon lock nut. Button head would look the best but I only had a socket head.