Crestline eMTB frame plugs and AXS cable clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU printed parts for a Crestline RS181.2. Plugs for the un-used frame holes and AXS cable clip.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made several parts for a Crestline eMTB RS181.2. Plugs for the unused holes in the frame when using a wireless dropper and wireless shifters (SRAM AXS). There one for two holes and a single. These are best printed in TPU so that is flexible and easily removed.
If you are using the AXS power cable, the wire hangs out exposed. Like a few others have done, I made a tpu clamp that uses the dropout mounts and secures the wires. I used a M4 25mm screw and washer with a nylon lock nut. Button head would look the best but I only had a socket head.