1 / 3
Stratocaster HH humbucker drawing and routing jig / template
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stratocaster HH humbucker drawing and routing jig / template. No frames.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Whaaaaaaaaaaatttt?
Stratocaster HH humbucker drawing and routing jig / template. Humbuckers without frames.
Two different jigs to choose from. Same dimensions, but one is thicker. The thinner one is good for drawing and the thicker one for routing. Scale to your liking if necessary. Center lines marked on both ends. The bottom edge of the jig automatically takes a straight line from the front edge of the bridge, if you have it in place.
Attention!
In this model, the pickups are a few millimeters closer to each other than usual. This gives a little more distance to the bridge and neck. I think it works best this way.
Specs:
PLA, PETG or ABS
10-50% infill
No supports needed