Polydryer support and roller for inverted plydryer box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to invert a polydryer box, so I designed this support and roller.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to support a filament spool inside an inverted polydryer box. I only found one option out there. It used bearings, and it didn’t work. So I designed this simple model. The support goes in the lid of the poly dryer and sits (aligned) in the middle. The roller just sits on top of the support, no bearings needed.
The model can be printed with no supports. I used PLA, however, if you’re going to dry with your box, I would recommend PETG, ASA or ABS.
3MF file is sliced for the Snapmaker U1.
Logo - Powered by MakerWorld-Mesh Graffiti (https://makerworld.com/makerlab/meshGraffiti)