Polydryer support and roller for inverted plydryer box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a way to invert a polydryer box, so I designed this support and roller.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I needed a way to support a filament spool inside an inverted polydryer box. I only found one option out there. It used bearings, and it didn’t work. So I designed this simple model. The support goes in the lid of the poly dryer and sits (aligned) in the middle. The roller just sits on top of the support, no bearings needed.
The model can be printed with no supports. I used PLA, however, if you’re going to dry with your box, I would recommend PETG, ASA or ABS.
3MF file is sliced for the Snapmaker U1.
Logo - Powered by MakerWorld-Mesh Graffiti (https://makerworld.com/makerlab/meshGraffiti)