Wheel for Rowenta X-clean
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare wheel, as a temporary fix for now (durability not guaranteed)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a wheel for the Rowenta X-clean vacuum/cleaner.
Our device came back from repair (broken handle) without the wheels. I designed this so that we can use the vacuum until we receive new wheels.
There are 4 parts, all in the STEP file. The axle and the tyre are meant to be printed separately from the rim and bearing, which must be printed together.
Tyre: printed in TPU (hopefully you get a better result than I have).
Rim+Bearing: printed in PETG
Axle: printed in PC-CF
I printed 4 axles for 2 wheels to have spares in case one breaks, although it is quite unlikely. I printed them with a brim, but that's a bad idea: the rim didn't go away completely and I had to hammer the axle into the bearing. PC-CF is definitely strong.
Clearance should be enough for the rim to rotate around the bearing.
The FreeCAD file is attached in case you need to edit.
Don't forget to like and post your make!