Hivora Sense AI Asian Hornet Bait Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AI bait station for Vespa velutina monitoring with ESP32-S3 camera and community-driven field testing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
Hivora Sense Locktopf – ESP32-S3 Camera Mount for Asian Hornet Monitoring
This is a 3D-printable housing / mounting concept for a Hivora Sense lockpot setup.
The idea behind Hivora Sense is to extend a simple attractant pot with a small camera-based monitoring unit. The setup is intended to support the observation and early detection of the invasive Asian hornet (Vespa velutina) near beehives, gardens or monitoring locations.
The current design is an early community / prototype version and may still change based on field testing and feedback.
The Camera Case Design is from: https://www.printables.com/model/681623-xiao-sense-case-seeed-studio-xiao-esp32s3-sense-ca?lang=de
Printing Settings
Use the Print Plate Image as an orientation help.
use brim at least 5 mm for the roof part
use support for camera case and holder/stator
Purpose
This design is intended for:
DIY lockpot monitoring setups
ESP32-S3 camera-based observation
beekeepers and citizen-science projects
field testing of camera placement and housing ideas
community-driven improvements around Asian hornet monitoring
Hardware idea
The design is intended to be used with small ESP32-S3 camera modules, for example:
Seeed Studio XIAO ESP32-S3 Sense
small camera module
USB-C power supply
optional microSD card
lockpot / attractant container
weather-protected outdoor placement
Notes
This is not a finished commercial product. It is a prototype for experimentation, documentation and community feedback.
Outdoor use requires additional care:
protect electronics from rain and condensation
avoid direct water exposure
check camera visibility
use suitable filament for outdoor use, such as PETG or ASA
avoid pointing the camera at private areas, windows, paths or neighboring properties
Community
This project is part of the Hivora / HornetLog ecosystem.
HornetLog is a mobile app for reporting sightings of the Asian hornet.
Hivora Sense explores how simple lockpots can be extended with camera-based monitoring to support early detection and field observations.
UPDATE - 2026-06-03
Seeed Studio has changed the camera module used on the XIAO ESP32-S3 Sense board.
According to Seeed Studio:
“The OV2640 camera has been discontinued, and the subsequent XIAO ESP32-S3 Sense uses the OV3660 camera model. However, the Wiki example code for the camera still applies.”
Because the OV2640 and OV3660 camera modules have a different field of view, the distance between the camera and the top surface of the pot needs to be adjusted.
For this reason, two stand versions are included:
stand_REV_A.stl — recommended for boards with the OV2640 camera
stand_REV_B.stl — recommended for boards with the OV3660 camera
The only relevant difference between the two versions is the camera distance to the top surface of the pot.
REV_B is slightly shorter to better match the field of view of the newer OV3660 camera module.
Most newer XIAO ESP32-S3 Sense boards use the OV3660 camera, so in most cases you should use:
stand_REV_B.stl
Feedback, remix ideas and field reports are welcome.
Project / App:
https://hornet-log.app/
Build Instructions
Deutsch: https://hivora.discourse.group/t/aufbauanleitung-hivora-sense-locktopf/12
English: https://hivora.discourse.group/t/build-guide-hivora-sense-wick-bait-station/19
Community Documentation (german):
https://hivora.discourse.group/
Cloud:
https://hivora.eu
Status
Prototype / community version.
More documentation, firmware notes and build instructions will follow.
