Hinge cover for VHS brand PVC door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinges for a normal hinge on a VHS brand PVC door.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What?
These are covers for the top hinges of VHS brand PVC doors. The door I have only opens on the traditional way, so it shouldn't fit a tilt-and-turn VHS door.
Why?
Due to sun exposure, paint and scratches most of the hinge covers of my windows (and doors) are either yellow, painted, broken or everything at the same time. After some time with no luck searching for a replacement I decided to try luck and design them by myself.
I've designed two pieces:
A long semi-cylindrical cover for the central bit of the hinge. Is slim (a single line with a 0.4 nozzle) and flexible enough to be insterted and removed without issues.
A long outside cover for the rest of the hinge. As there shouldn't be much need for removal the fit is strong so it doesn't fall.
Need to know:
It's slightly different than the stock ones but they're as functional as them, although I didn't have the central bit (not sure if it even existed at one point). I did them this way so they match the ones I did for my windows.
I'd recommend to print by object with brim (at least for the central part). I've found is less probable to have issues with the thin central piece if the nozzle doesn't move back and forward too much.
My door has a bottom hinge that is exactly as the ones in my windows, check them here: Bottom hinge cover for VHS brand PVC windows
I also have a cover for the top hinges of VHS PVC windows: Top hinge cover for VHS brand PVC windows