1 / 6
Wurkkos HD12 Headlamp Torch Bicycle-Mount with Anti-Glare-Shade-Cap — zdjęcie 1
1 / 6

Wurkkos HD12 Headlamp Torch Bicycle-Mount with Anti-Glare-Shade-Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for the Wurkkos™ HD12 headlamp, allowing it to be used as a bicycle light on a Vello™ bicycle.

Ocena
0 / 5
Polubienia
3
Pobrania
0
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

You also need to print a fitting counterpart! See below.

Wurkkos HD12 Headlamp Mount for Vello Bicycle with shade + FreeCAD Model

Holder for the Wurkkos HD12 headlamp, allowing it to be used as a bicycle light on a Vello bicycle.

Description

This model allows you to use the Wurkkos HD12 headlamp as a bicycle light. It makes an ideal bicycle light in my opinion and when needed you can just grab it of the bike.

Print the corresponding Counterpart and connect them to fit it to our bike. Either zip-tie it to the handle-bar or mount it on a Vello™ magnetic safety lamp mount.

The holder also includes a shade to help prevent blinding oncoming traffic. This makes the headlamp more suitable for road use, where an uncovered flashlight or headlamp beam can be too bright for other riders, pedestrians, or drivers.

The model was designed in FreeCAD, and the source file is included for modification.

Fitting Counterparts

use vertical versions with this model

Features

  • Tested and improved over several weeks

  • Holder for the Wurkkos HD12 headlamp

  • Allows use as a bicycle light

  • Various mounting choices (it's an extend-able system)

  • Includes integrated shade to reduce glare

  • Helps avoid blinding oncoming traffic

  • FreeCAD model included

Printing

  • Material: PETG or PCTG recommended. Using a dark color make parts more UV resistant and last longer outdoors.

  • Wall Strength / Perimeter Count: 4-5 for 0.4mm nozzle, 3 for 0.6mm nozzle

  • Infill: You don't need much. Strength comes from perimeter count anyway

  • Support: yes. Use Paint-On Support from .3mf.

    • paint-on support for the middle of the shade. Don't let the support touch the walls of the shade as it then becomes quite hard to remove.

  • Brim: nope

This is part of a set of flashlight mounts

FreeCad Source File

Please upload your remixes here and/or post suggestions.

To make it easier for you to remix or make small modifications, I always upload the FreeCAD source for my models. For this model you can find it here.

License

Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0

  • Share with others

  • Don't keep your modifications to yourself

  • Always attribute the source!


Tagi