1 / 5
Furoshiki Patchin - Bag Handles w/ Magnetic closures for 27" Furoshiki — zdjęcie 1
1 / 5

Furoshiki Patchin - Bag Handles w/ Magnetic closures for 27" Furoshiki

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy, easy to print handles to convert your 27" furoshiki clothe into a bag with a handle and magnetic closures.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Saw this recently in Japan and thought it should be pretty easy to model, so here we are, my first, built-from-scratch model. Hope you like it.

Printed in PLA, pretty much standard speed settings, except I set all walls to 6. No supports, brims or borders. Obviously you'll need to print two of them. I printed mine on a Prusa Mini+ with input shaper, .15mm layer height, no supports, brims, etc... Took a couple of hours for each one.

The magnets that I had on hand came from Daiso and are 6mm dia x 3mm h neodymium. The holes are 3.1mm deep, allowing the magnets to slightly recess, should you desire to do that. They are press fitted and I have yet to have one pull out, but YMMV. I used a bench vise to press them into place.

When installing the three magnets, I recommend installing all three on a side in the same orientation. This prevents polarity issues and allows the handles to be installed in either direction.

Sorry, no pictures. I gave my originals to my daughter, who is a big furoshiki fan and fell in love with them when I showed them to her. She even took the original 2 magnet prototype which I felt needed more holding strength.  **update: Printed a new set and took some pics.

Hope you enjoy this. Mahalo! 🤙

Tagi