Furoshiki Patchin - Bag Handles w/ Magnetic closures for 27" Furoshiki
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy, easy to print handles to convert your 27" furoshiki clothe into a bag with a handle and magnetic closures.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Saw this recently in Japan and thought it should be pretty easy to model, so here we are, my first, built-from-scratch model. Hope you like it.
Printed in PLA, pretty much standard speed settings, except I set all walls to 6. No supports, brims or borders. Obviously you'll need to print two of them. I printed mine on a Prusa Mini+ with input shaper, .15mm layer height, no supports, brims, etc... Took a couple of hours for each one.
The magnets that I had on hand came from Daiso and are 6mm dia x 3mm h neodymium. The holes are 3.1mm deep, allowing the magnets to slightly recess, should you desire to do that. They are press fitted and I have yet to have one pull out, but YMMV. I used a bench vise to press them into place.
When installing the three magnets, I recommend installing all three on a side in the same orientation. This prevents polarity issues and allows the handles to be installed in either direction.
Sorry, no pictures. I gave my originals to my daughter, who is a big furoshiki fan and fell in love with them when I showed them to her. She even took the original 2 magnet prototype which I felt needed more holding strength. **update: Printed a new set and took some pics.
Hope you enjoy this. Mahalo! 🤙
