Tripp Lite Surge Protector Magnetic Keyslot Mount - Isobar 8 Ultra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for use with the ISOBAR8ULTRA specifically. Includes a G-Code pause for inserting magnets. Not tested vertically
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I printed two of these to mount the surge protector onto my network rack magnetically using neodymium magnets. (one print for each set of two keyslot mounting holes)
I have not tested this vertically so you may need stronger/larger magnets.
This was primarily to keep the strip from sliding around on the metal shelf in my rack.
This is made for use with one 2x6x20mm neodymium magnet for each print.
(One surge protector requires two prints/magnets in total)
I have included the g-code that includes the pause for magnet insertion, but also the 3mf file in case you want to adjust to model or the negative space for different size magnets.
Let me know if you have any questions or requests.