Dacia Dokker Modular Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mobile phone holder set with interchangeable mounts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to this holder, you don't have to remove the front panel again to change the device mount, just change the holder itself.
Mounting:
Carefully disassemble the black plate around the auto radio, you can carefully detach the fixing points around the edge.
Disconnect the two cables from the switches
Disassemble the two fan part (both side you have to push 3 plastic hook)
Insert the holder base
Take back the fan parts
Take back the switch wires
Place back the black front plate
Screw on the desired bracket
Accesories:
M3 x 8 (On the outer sides)
M3 x 20 (In the middle through the ball)
I recommend using ASA, PCCF for printing and 4 perimeters. If set up correctly, supports are not necessary. However, I prefer to use them.