Logitech G29 Quick Release Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logitech g29 wheel quick release mod with auto lock and working buttons. Custom wheel mount is for wheels that has 6x7
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
VIDEO LINK:
Things you need:
1x 7 pin PH2.0 female and male connectors set with 150mm wires
x2 8 pin or 7 pin Magnetic Pogo Pin Connector 2.54mm set with ears
x1 M3x6-8mm bolt and M3 nut
x2 M6x30mm Hexagon Socket Head Cap Screws and x2 M6 nuts
x3 4x25-30mm pan head wood screws
x6 M5x20mm countersunk screws
x4 D2x6-8mm screws for magnetic connectors
x2 10x2 or x1 10x4 round magnet
x1 6x2 round magnet
AWG22 or AWG24 wire
Print settings I used:
4 wall
5 top and bottom layers
20% gyroid infill
Tree auto supports except Custom wheel 2. part normal auto
PETG filament
Print orientation is important
To add magnets pause the printing at layer:
145 for G29 original wheel mount
145 for custom wheel mount part 1
44 for lock pin
To add M6 nuts to custom wheel mount part 1 pause printing at layer 159.
When connecting wires with connectors be sure to attach correct wires. Wire order needs to be same on wheelbase connector and
G29 wheel board connector.
Custom wheel mount magnetic connector 2 pins is needed to connect together. Pins that are connected to white and yellow wheelbase wires.
Watch the video for instructions and if you have questions or problems let me know.
If you have fitment issues you can sand parts or let me know I can make changes.