1 / 2
Magnetic Stirrer Fish Housing for 6x20mm Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for 6x10 or 6x20mm magnets
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Magnetic Stirrer Fish Housing for 6x20mm Magnets
Printed with petg 0.12 layer height, %100 solid in vertical position with auto tree supports. Also recommended 10mm brim.
PS. Your slicer will warn you as it is nonmanifold but don't mind the warning just print it !
