U1 a Box - A Top Cover Box for SnapMaker to protect you from fumes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and functional top cover box for the SnapMaker U1 using a plastic clothes box.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial

INTRODUCTION
All the printer I have have a fumes extraction system. I made this box because I wanted also my SnapMaker U1 to have also the fume extraction system, and since the U1 is already enclosed, only the top cover was required. What is different from other covers ?
This is a functional top cover, designed to be practical and easy to print, without unnecessary frills.
Due to the large size, it was a must that no supports had to be used in order minimise print time and material waste. The complex parts are just snapping together and are assembled via normal screws and nuts.
The plastic cover box has a right size that avoid any interference on the back tools tubes. Other variation use boxes that touch the tubes or create friction, and this can cause issues to the tools during printing.
I printed it in PLA but PETG could be better and more temperature resistant.
There are 3 projects:
The top parts (in contact with the box)
The raisers (between the printer and the top parts)
The tube attachment for fumes. It is optional if you don't want to connect the printer to a fume extractor. The tube diameter is 100 mm. The hole in the box is also 100 mm diameter.
BILL OF MATERIAL
10 M3 x 20mm hex screws
10 M3 hex nuts
A plastic box for dresses 450x600x300 mm (https://plasticforte.com/producto/caja-forte-f9-54-l/)

BUILD INSTRUCTIONS
Print all plates parts, and then fix each Top part with the corresponding Raise part using one or two M3x20 screw and nuts.

Put the four small support feet into the four gum cover.

Assemble the printed parts forming the printer profile and put on the U1 so that the holes correspond to the 4 small feet coming out.

Complete the profile.

Put the plastic cover over it.
