Power Brick Mount for Logitech G Pro Wheel DD11
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the power brick for the Logitech DD11 onto your rig, or a wall if you want
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2 piece holder for the Logitech G Pro Wheel power supply to mount on your rig. One of the holders has a hole for the LED to shine through, so make sure not to mix them up.
There are two configuration options and a choice between using M6 or M8 hardware:
Single hole for single slot mounting
Double hole for dual slot mounting on a 4080 aluminum extrusion
You only need to download one file. Each file contains both holders and are ready to print as is.
My prints are in PETG with CrossHatch infill and have been holding up well. Gyroid is another good infill that I usually default to.
15% infill, CrossHatch pattern
3 perimeters