1 / 2
Scaled 3 player chess to incoperate 6x2 mm magnets — zdjęcie 1
1 / 2

Scaled 3 player chess to incoperate 6x2 mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scaled boards by 25% and added pockets for 6x2 mm magnets.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Share Alike

I wanted to incorporate magnets into the board so that I could use a different chess set. I scaled the original STL files and added the magnet pockets using Tinkercad.

On my printer, the pockets provided a tight friction fit, which was ideal since I didn't need glue to secure the magnets during the printing process. However, your mileage may vary depending on your printer’s calibration and tolerances; I recommend printing a small test piece first to verify the fit.

A future improvement will be to modify the pockets that hold the board sections together. Since I didn’t update those specific dimensions, I had to use a makeshift magnet and glue it into place.

Tagi