Scaled 3 player chess to incoperate 6x2 mm magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scaled boards by 25% and added pockets for 6x2 mm magnets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
I wanted to incorporate magnets into the board so that I could use a different chess set. I scaled the original STL files and added the magnet pockets using Tinkercad.
On my printer, the pockets provided a tight friction fit, which was ideal since I didn't need glue to secure the magnets during the printing process. However, your mileage may vary depending on your printer’s calibration and tolerances; I recommend printing a small test piece first to verify the fit.
A future improvement will be to modify the pockets that hold the board sections together. Since I didn’t update those specific dimensions, I had to use a makeshift magnet and glue it into place.
