ESP32-S3 Klipper Dashboard Case with Weather, Crypto & Moonraker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32-S3 display case for a Klipper, weather, crypto and chart dashboard on the Guition JC4827W543
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printed enclosure for the Guition JC4827W543 ESP32-S3 HMI display. The case was designed for a small desktop or printer-side information panel that can be used with my Arduino/LVGL Klipper Crypto Weather Panel project.
The display firmware shows local time, current weather, live crypto prices, a configurable candle chart, and Klipper/Moonraker status from a 3D printer running Mainsail or a compatible setup.
The main goal of this Printables upload is to share the printable enclosure. The firmware, setup notes, screenshots, and full bill of materials are available on GitHub.
Features
- Case for the Guition JC4827W543 ESP32-S3 HMI display
- Designed for a 480 x 272 dashboard UI
- Works as a Klipper/Moonraker printer status panel
- Shows time, weather, crypto price data, candle chart, and printer status screens
- Compact printer-side or desktop form factor
- Arduino/LVGL firmware available on GitHub
- User-friendly browser flashing tool available
- Uses Wi-Fi API data for weather, crypto, and printer status
Firmware / Flashing
The easiest way to flash the firmware is the browser-based ESP32 Web Flasher:
https://tome9111991.github.io/ESP32-S3_Project/?board=guition-jc4827w543&project=kcwp
Use Chrome or Edge, connect the display by USB, enter your Wi-Fi, location, crypto, and optional Klipper/Moonraker
settings, then build and flash the personalized firmware from the browser.
Manual source code and setup notes are available here:
The full BOM, including links for the display, screws, and heat-set inserts, is also listed on the GitHub project
page.
Required Hardware
- Guition JC4827W543 ESP32-S3 HMI display
- Printed case parts
- M3 screws
- M3 heat-set inserts
- USB cable / power supply
- Access to a Wi-Fi network
- Optional: Klipper/Moonraker printer for the printer status screen
Notes
The firmware uses a private local configuration file or the Web Flasher configuration form, so Wi-Fi credentials, location, crypto pair, and Klipper/Moonraker URL are not stored in the public project files.
The display UI in my build is mostly German because it was made for my own local setup, but the code can be customized.
Print Settings
- Material: PETG or PLA
- Layer height: 0.2 mm
- Infill: 15-25%
Assembly
1. Print the case parts.
2. Install the M3 heat-set inserts.
3. Place the Guition JC4827W543 display into the case.
4. Secure the display with M3 screws.
5. Open the Web Flasher link in Chrome or Edge.
6. Connect the display by USB.
7. Enter your configuration and flash the firmware.
8. Power the display and check that Wi-Fi, weather, crypto, and optional Klipper/Moonraker data load correctly.