Heltec Mesh Node T096 / Heltec Wireless Tracker V2 case for lipo battery and internal antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What you'll need:
A lipo battery LP103454 (I used one from EEMB, available on Amazon and Aliexpress) https://www.aliexpress.com/item/10000043885157.html
4x M3 6mm screws. The inset holes are 6.2mm for the screw heads.
4x M2.5 5mm screws. The inset holes are 5mm for the screw heads.
1x flat antenna, I used one from a RAK kit but others such as the Seeed antenna that comes with the SX1262 radios will also work. I shortened the coax on mine.
Once you've assembled it, make sure the antenna is connected before you connect the battery!
I used a piece of a zip tie to slot in at the end of the node to keep it pressed up against the casing to stop it moving around. I had to leave the gap to enable the node to slot in smoothly.