Heltec Mesh Node T096 / Heltec Wireless Tracker V2 case for lipo battery and internal antenna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What you'll need:
A lipo battery LP103454 (I used one from EEMB, available on Amazon and Aliexpress) https://www.aliexpress.com/item/10000043885157.html
4x M3 6mm screws. The inset holes are 6.2mm for the screw heads.
4x M2.5 5mm screws. The inset holes are 5mm for the screw heads.
1x flat antenna, I used one from a RAK kit but others such as the Seeed antenna that comes with the SX1262 radios will also work. I shortened the coax on mine.
Once you've assembled it, make sure the antenna is connected before you connect the battery!
I used a piece of a zip tie to slot in at the end of the node to keep it pressed up against the casing to stop it moving around. I had to leave the gap to enable the node to slot in smoothly.