Counting matching models…
Heltec T096 Case with a 3000mAH 103665 battery I thinned out part of the main case so the charging light is easier to see. I added a version that is flat. I also shrank the button for a better fit. https://www.amazon.com/dp/B0F1FHHH5X No…
These are all in the alpha phase, just wanted to whip something up for this new device. Please offer advice, changes, makes and print settings. I've created all these in tinkercad sooooo... yeah. I don't have specific print settings as…
I got bored of boring boxes and military inspired cases so I decided to go a bit crazy with a retro futuristic with this design. What you'll need: 5x M3 5mm screws. The inset holes are 6.2mm for the screw heads. The model has threaded…
The original case design for the Heltec V3 Lora board has been modified for the Heltec T096. Secure with a M3x12mm screw. Fits: - Battery up to 8mm x 30mm x 48mm (Extended version: 10mm x 30mm x 48mm) - U.FL to SMA Pigtail 10cm long -…
I've included two lids, one with the design in the photo, and a blank one. I've also included two battery compartments. One for the EEMB battery (link below) and a bigger compartment 37x57x11 if you have something else that fits. What…
I've been using the Heltec T114 with the great 3000 mAh case from Printables, and I really loved that design format https://www.printables.com/model/1451567-heltec-t114-3000-mah However, I ran into two problems: 1. The case was still a…
I couldnt find any models for the Helltec Mesh Node T096 or the Wireless Tracker v2, so i made one...
Basic mod of ChimeraX's great Heltec t096 case that adds a standing base in place of the strap mount, and expanded battery compartment for pouch batteries. Fits Meshnology 3000mAh batteries, with width for wider pouches. This remix is…
My current settings are 0.4mm nozzle @ 0.2mm layer height. Heltec T096 - https://ali.click/vzjv61s GIZONT 20 см GT-800 868 МГц - https://ali.click/406gxy SMA-U.FL Cable RG178 https://ali.click/ghe6d1l Fits a single Li-ion 21700 battery…
Compact enclosure for the Heltec T096 with a 2000 mAh 103450 battery. Two versions are available: with a snap-fit closure and with screw fastening (requires two M2.5 screws and two M2.5 nuts), with an optional clip.
Resized Alley Cat's holster to accommodate T096 case. It's version for Baofeng UV5R clip with nuts, so you gonna need - M2.5 nut x2 and M2.5X6 screw x2 or - M2.5 nut x4 and screws from clip's kit Kit screws most likely gonnа be M2.5x8 and…
I built a slim case which is easy to print with Tree-supports. It is for the Heltec T096 with a 3000mAh Battery. Works with antennas up to a Maximum Diameter of 15mm. No Tools needed. No screws. Ich habe euch ein schlankes Gehäuse für den…
Solar case for the Heltec Mesh Node T096 using a 1100mAh battery. No screws or bolts required. The T096 slides onto rails, make sure these are smooth. The cap part locks in place and keeps the node and solar panel in place as well as…
Remix created to add retention to the antenna connectors on this Heltec T096 mount. 5x5mm grid mounting pattern Print profile optimized for ASA. You can print with any others but may need to scale. I have it set for a perfect friction fit…
Rough Alpha version of case, posting because there aren't a lot of options. Requires M3 bolts and brass heatset inserts for assembly. Both pieces are included in file, just split them in the slicer. I printed in a standard profile with a…
V2, Reworked the USB to allow a few more USB connectors overmold to fit, and allowed more room for the battery connector and wires to come off the connector. This H1+ T096 remix case is a remix of the original H1+ case design by vascosim…
Features: Fits a 27100 cell in an ergonomic node has a lanyard loop with a slot so the lanyard doesn't make it rock on a table can charge while upright Parts: 1x 21700 button top cell 1x 21700 battery holder ( this one works ) 1x SMA…
A self-sustainable, standalone compact foldable Meshtastic node powered by solar. The Heltec T096 has LoRa & GPS module built in, plenty of pins for peripherals. By utilizing the M5Stack CardKB module, the device can be operated without a…
I really like the tiny case for the Heltec T096. But I didn't want to have to rely on the spicy pillows and would rather have the option to use an 18650 battery. When I looked for an option, they were all fairly large, sharp-edged, or had…
Requires you replace 2 of the M2x5 screws with longer M2x8 self-tapping screws. I used these from Amazon: 1200Pcs Black Tiny Self Tapping Screws for Wood, Plastic and Soft Metal. Phillips Pan Head M2 M2.5 M3
The original case was extremely tight for the makerfocus battery, to the point it was scraping the wrapping over the BMS. So I widened the case slightly. I also opened up space for the battery wires to sit under the Heltec T096, reducing…
I got bored of boring boxes and military inspired cases so I decided to go a bit crazy with a retro futuristic with this design. What you'll need: 5x M3 5mm screws. The inset holes are 6.2mm for the screw heads. The model has threaded…
Solar case for the Heltec Mesh Node T096 using a 1100mAh battery. No screws or bolts required. The T096 slides onto rails, make sure these are smooth. The cap part locks in place and keeps the node and solar panel in place as well as…
These are all in the alpha phase, just wanted to whip something up for this new device. Please offer advice, changes, makes and print settings. I've created all these in tinkercad sooooo... yeah. I don't have specific print settings as…
Another T096 case.... Trying to make the smallest, most functional case. This one is shorter than the modular line and houses a 1000mah spicy pillow, possibly a 2000mah. These are all in the alpha phase, just wanted to whip something up…
What you'll need: A lipo battery LP103454 (I used one from EEMB, available on Amazon and Aliexpress) https://www.aliexpress.com/item/10000043885157.html 4x M3 6mm screws. The inset holes are 6.2mm for the screw heads. 4x M2.5 5mm screws.…
UPDATE: This has been replaced with a whole redesign V2 here: Original description: I built this case to be as compact as possible, so battery has to go in first then antenna and finally the T096. The 18650 wires are soldered on so…
Simple model for Heltec T096 board and 18650 battery Free space is provided for a GPS or any other module. The project includes 2 case options: one for M3 heat-set inserts and one with M3 threads directly in the plastic. I printed it from…
A simple pocket size case for the Heltec T096 and Wireless Tracker V2. This does not require any screws, only some glue if you wish to use the optional faceplate. There is also a solar version of this case. When fitting the SMA connector…
I couldnt find any models for the Helltec Mesh Node T096 or the Wireless Tracker v2, so i made one...
Slim case for the Heltec T096 Remix of the version on Thingiverse by adamziegle October 07, 2023 - i did not find this version on Printables. This is a very tight case for the board and battery. The board need to be hot-glued in place to…
This is my 3rd iteration on coming up with the most compact I can make a Heltec T096 and 18650 battery. Features Lid clip to prevent bowing in the middle Taller shape to fit the hand better. Fits 18650 cell. lanyard loop at the top. I…
I couldn't find any cases for the T096 that used 21700 lithium ion batteries so I made one. Feel free to contact me for Fusion 360 files, etc. Parts Heltec T096 21700 cell SMA antenna with pigtail Assembly Attach battery lead to battery.…
Remix of https://www.printables.com/model/1752068-heltec-t096-case
This is a card sized slim Meshtastic node powered by Heltec T096 (NRF52840 based micro-controller with built in GPS and LoRa module), and a 3000mAh LiPo battery (68mm x 36mm x 10mm). Plenty of spacing to fit slightly larger battery. The…
