Heltec T096 / Wireless Tracker v2 21700 cell Mesh Node
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mesh node that fits a 21700 inside a battery holder along side a T096 or Wireless Tracker v2
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Features:
Fits a 27100 cell in an ergonomic node
has a lanyard loop with a slot so the lanyard doesn't make it rock on a table
can charge while upright
Parts:
1x 21700 button top cell
1x 21700 battery holder (this one works)
1x SMA pigtail (or RP-SMA if you have a weird antenna I guess) - mine was 6 inches
1x M4x8 bolt and nut
the stuff that comes with a T096 or WTv2
Steps:
print both parts, add a pause to insert the nut near the top of the body.
break the tabs off the battery holder by trying to bend them around to the back. solder the wires that came with the heltec to the + and - side of the holder - minus is the side with the big angled spring
when inserting the battery and holder into the part, pass the plug through first before the battery. connect the antenna and battery to the node, then slide it into the rail, usb side first.
attach the bottom cover with the screw