Belt Holder IKEA Lastare
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw mounted belt holder for IKEA LASTARE.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This belt holder is specifically designed for the IKEA LASTARE series. It attaches directly to the existing holes inside the cabinet and does not require any modification or drilling.
Mounting
The holder is mounted using 2 original IKEA screws 4,5x10 mm (IKEA part number: 113928). These screws are included with the LÅTSARE cabinet / shelves and screw directly into the existing holes of the cabinet. No additional hardware is required.
After installation, the visible screw heads can be covered with the included cover caps.
Recommended Print Settings
Material: PETG
Perimeters: 2
Infill: 20 % Gyroid
Supports: Not required