Britax Römer King II Headrest Tab Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is small plastic tab/tongue on the headrest adjustment mechanism.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
The headrest adjustment mechanism on Britax Römer King II car seats uses a small plastic tab that can break over time due to regular use. This replacement part is designed to match the original component's dimensions and functionality, allowing you to easily adjust the headrest height again.
Key Features:
Replacement for the original Britax Römer King II headrest tab
Designed for durability with PETG material
Easy installation - simply snap into place
Restores full headrest adjustment functionality
Print Settings
Material: PETG (recommended for strength and durability)
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 50-80% (higher infill recommended for strength)
Supports: None required
Print Time: Approximately 10-30 minutes (depending on printer)
Recommended Settings:
Use PETG for best durability and heat resistance
Consider adding extra perimeters (3-4 walls) for increased strength
Post-Processing
No post-processing required. The part can be installed immediately after printing and cooling.
Assembly
Simply insert the printed tab into the headrest adjustment mechanism where the original piece was located. It should snap or slide into place securely.
Notes
This is a functional replacement part designed to restore your car seat to working condition. While printed in PETG with proper settings, it should provide long-lasting performance comparable to the original part.
Safety Notice: This replacement part is for the headrest adjustment mechanism only and does not affect the safety restraint systems of the car seat.