1 / 3
Philips Saeco Syntia Cappuccinatore Cover (HD8838 / HD8839) – No More Flaking Chrome — zdjęcie 1
1 / 3

Philips Saeco Syntia Cappuccinatore Cover (HD8838 / HD8839) – No More Flaking Chrome

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D‑printed replacement cappuccinatore cover to replace flaking chrome on Philips Saeco Syntia machines.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This model is a direct replacement for the cappuccinatore cover used on the Philips Saeco Syntia Cappuccino series. The original chrome‑plated part is known to flake, peel, and degrade over time, especially due to constant exposure to steam and heat. Once the chrome starts failing, the part quickly looks worn and unpleasant. This printed replacement solves that problem by removing chrome from the equation entirely.

OEM Reference

  • Part code: 17000217

  • 12NC: 996530067665

  • OEM description: CHROM. CAPPUCCINATORE COVER XSMC ASSY

Compatible Machines

  • HD8838

  • HD8839

  • Philips Saeco Syntia Cappuccino

Print Orientation & Supports (Important)

For the best cosmetic finish, print the model upright, exactly as shown in the screenshots.

  • ✅ Use tree supports

  • ✅ Supports are only on the inside of the cover

  • ✅ Any support marks will be completely hidden during normal use

This orientation keeps all visible exterior surfaces clean and smooth.

Recommended Print Settings

The following settings were used successfully:

  • Layer height: 0.2 mm

  • Walls: 4

  • Infill: ~35%

  • Supports: Tree supports (internal only)

Material Recommendations

  • PLA
    ✔ Suitable for test-fitting only
    ✘ Not recommended for long-term use — steam exposure caused visible warping

  • ✅ ASA (recommended)

  • ✅ ABS (recommended)

  • ⚠ PETG (may work, but ASA/ABS are safer near steam)

If you plan to keep this installed long-term, ASA or ABS will handle heat and moisture far better than PLA.

Why Print This?

  • Eliminates peeling chrome flakes

  • Restores a clean, solid appearance

  • Keeps a perfectly functional machine in service

  • Simple, functional replacement — no redesigns, no gimmicks

This is a straightforward, practical part meant to keep a great coffee machine looking and functioning properly for years to come.

Tagi