Stryfe Banned Blasters Cage (with optional BCAR)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to throw the wheels and motors into a Stryfe, but didn't have the cage. Now I have the cage.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Both of these cages require shell cutting. For the regular cage refer to the Banned Blasters video on shell cutting a Stryfe.
For the BCAR version, extra shell cutting is required near the front, as well as some for the front muzzle piece. Refer to the image for the cuts needed here. The BCAR is different in this image, but the cuts should still be the same.
Supports are needed for either of the cages, but not the BCAR. For the BCAR, print in the provided orientation. You can either print the whole thing at .12mm, or add a height modifier from 32-43mm and just print that part at .12mm.
I am still testing various BCARs to see what works the best with the Stryfe at 200fps, but this one is the best that I've found so far.