Quick Swipe: Weighted, One-Handed Wipe Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep one hand on your wiggly kid (or muddy pets), while the other grabs a wipe without a tug-of-war with the wipe pack.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Keep one hand on your wiggly kid (or muddy pets), while using the other to grab a wipe without a tug-of-war with the wipe pack. Only requires one additional item: weights, or modeling clay, or anything heavy that fits in the donut.
Required to purchase: something heavy. I used 1oz tire weights found on amazon. I like a satisfying thud when I place the donut over the opening, so I used 16 of these 1-ounce weights stuck inside the donut (1lb). I've also seen modeling clay as a cheap 3D printing weight option (or pennies, BBs, anything that fits).
Optional item: 8mm adhesive rubber feet to fit in the punchouts on the base. These provide the grip for a true one-handed pull on smooth surfaces.
The donut ‘hole’ for the wipe is a 115mm x 75mm oval. I've tested Pampers and Target's Up&UP brand wipes. Based on those dimensions it looks like Cottonelle, Kirkland and possibly Dude Wipes would also fit. Only recommended for packages that are resealable.
Print settings recommendations:
- PETG or, if printing PLA, I recommend using an auxiliary fan deflector or turn down your fan (in filament settings) to prevent warping on the large flat base.
- Matte PLA looks great (as pictured), but feel free to try any color variations with the single-color print profile.