Quick Swipe: Weighted, One-Handed Wipe Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep one hand on your wiggly kid (or muddy pets), while the other grabs a wipe without a tug-of-war with the wipe pack.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 17
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Keep one hand on your wiggly kid (or muddy pets), while using the other to grab a wipe without a tug-of-war with the wipe pack. Only requires one additional item: weights, or modeling clay, or anything heavy that fits in the donut.
Required to purchase: something heavy. I used 1oz tire weights found on amazon. I like a satisfying thud when I place the donut over the opening, so I used 16 of these 1-ounce weights stuck inside the donut (1lb). I've also seen modeling clay as a cheap 3D printing weight option (or pennies, BBs, anything that fits).
Optional item: 8mm adhesive rubber feet to fit in the punchouts on the base. These provide the grip for a true one-handed pull on smooth surfaces.
The donut ‘hole’ for the wipe is a 115mm x 75mm oval. I've tested Pampers and Target's Up&UP brand wipes. Based on those dimensions it looks like Cottonelle, Kirkland and possibly Dude Wipes would also fit. Only recommended for packages that are resealable.
Print settings recommendations:
- PETG or, if printing PLA, I recommend using an auxiliary fan deflector or turn down your fan (in filament settings) to prevent warping on the large flat base.
- Matte PLA looks great (as pictured), but feel free to try any color variations with the single-color print profile.