Armrests for ODDESUND outdoor furniture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Armrest replacement for ODDESUND outdoor furniture by Jutlandia
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Replacement armrest for ODDESUND outdoor furniture by Jutlandia. The armrests are ~65cm long, so they typically does not fit in small ordinary printers, that is why i have created two versions:
Armrest full length, file:
Armlene - full.3mf
Armrest splitted in three files:
Bakdel.3mf
Midtdel.3mf
Frontdel.3mf
Plugg.3mf (You will need 4 of these for one armrest)
Print instructions
Armrest
Perimeters: 4
Layer height: 0.20mm
Top layer: 1mm
Bottom layer: 0.8mm
Infill: 25% Gyroid
Filament: PETG (Or other weather proof)
Brim: Recommended
The plug connectors
Infill: 100%
Filament: PETG
Orientation: Laying down recommended
Brim: Recommended
Glue the pieces together.
Recommended to drill a hole for the screws before you insert the screws to prevent the armrest from cracking.