Milwaukee PACKOUT Double Cleat Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double Cleat for hanging Milwaukee PACKOUT cases under a desk or other over hanging surface.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — NoDerivatives
Double cleat for hanging Milwaukee PACKOUT cases underneath a desk or other overhanging surface
Minimum spacer height is 3mm. 5mm, 10mm spacers are included.
A 14.5mm per-spaced cleat is also included.
Hardware
6x #6 Drywall screws per cleat (3/4 inch minimum length)
Print settings
0.2 mm Layer height
20-35% Gyroid or Cubic Infill
3-4 Walls/Perimeters
Normal Support
Update 05/15/2026
1. Added a variant of the 5 and 10mm spacers with with a latch to keep PACKOUT cases from sliding off cleat at unwanted times.
If you have any spacer heights you want, things that should be changed, or other ideas leave a comment. I will do my best to reply in a reasonable amount of time.