1 / 2
Grommet for hole in melamine (19 mm or 3/4 inch diameter) — zdjęcie 1
1 / 2

Grommet for hole in melamine (19 mm or 3/4 inch diameter)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small grommets to line hole made by 3/4 inch bit in 16 mm melamine. Cover 10mm into the hole.

Ocena
0 / 5
Polubienia
9
Pobrania
74
Wydruki
1
Wyświetlenia
596
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Grommet to cover hole done by ¾ inch bit into 16 mm melamine.

It has a 3.5 mm brim to cover for drilling imperfections and chips in the melamine.  It goes into the hole a little more than half, which looks nice enough.

Printed in vase mode, with the complete individual objects option turned on.  I printed on black PETG, but any rigid plastic should do fine.

 

Tagi