Grommet for hole in melamine (19 mm or 3/4 inch diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.52 – €0.63 net (excluding VAT)
For file: 19 mm by 10 mm grommet (9 per plate)_0.2mm_PETG_MINI_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 44.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small grommets to line hole made by 3/4 inch bit in 16 mm melamine. Cover 10mm into the hole.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 1
- Views
- 597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Grommet to cover hole done by ¾ inch bit into 16 mm melamine.
It has a 3.5 mm brim to cover for drilling imperfections and chips in the melamine. It goes into the hole a little more than half, which looks nice enough.
Printed in vase mode, with the complete individual objects option turned on. I printed on black PETG, but any rigid plastic should do fine.