Landcruiser 70 series front speaker adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for the front speakers of a steel-dash 70 series Landcruiser.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter for the front speakers of a steel-dash 70 series Landcruiser. This model is a tight fit and can be resized slightly smaller if preferred. The "right" adapter is rotated slightly to allow better access to bolts.
Passenger side: bend the glovebox door retainer slightly to the right to minimise interference.
Driver side: it's a tight fit but works. Remove the shroud, dash cluster, and aircon vent to install.
Hardware required: any generic bolts, preferably button-head, under 5mm diameter. I used EPDM spacers as vibration dampers.
Recommend PCTG or an engineering filament, but I used PLA for my original prototypes, which are perfectly fine even after 3 years under the dash.