Landcruiser 70 series front speaker adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for the front speakers of a steel-dash 70 series Landcruiser.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Adapter for the front speakers of a steel-dash 70 series Landcruiser. This model is a tight fit and can be resized slightly smaller if preferred. The "right" adapter is rotated slightly to allow better access to bolts.
Passenger side: bend the glovebox door retainer slightly to the right to minimise interference.
Driver side: it's a tight fit but works. Remove the shroud, dash cluster, and aircon vent to install.
Hardware required: any generic bolts, preferably button-head, under 5mm diameter. I used EPDM spacers as vibration dampers.
Recommend PCTG or an engineering filament, but I used PLA for my original prototypes, which are perfectly fine even after 3 years under the dash.