Counting matching models…
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Like there isn´t enough headphone holders. I wanted to makea design what fits in envelope and also Prusas plate. Assembled without screws, tools or glue, no supports needed naturally. Measurements: Height: 190mm Width: 130mm Length: 130mm…
As I recently got into playing Mahjong and did not have tile holders yet for my set I decided to design my own tile holders that fit my needs. It has a width of 510 mm when assembled . The individual pieces have a width of 170mm . The…
Use either coin or highjackig tool for your next shopping ;) Category: Tools
The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
This year's christmas present for my mom. Thought I'd share it with you. A standard set of 144 Mahjong tiles. The case measures roughly 180x155mm (without the hinges and therefore should hopefully also be printable on the Prusa MINI). The…
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
Same enclosure, I just removed the personal logo inlay from the pieces.
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
I recommend printing them with the icons towards the plate of the printer, to save color and make them look a little more nice. Scale by 50% for the travel version.
Shrinathji is a form of Krishna, manifested as a seven-year-old child. The principal shrine of Shrinathji is the Shrinathji Temple in the temple town of Nathdwara, 48 kilometres north-east of Udaipur city in Rajasthan,India. According to…
That is a reproduce copy of hinge, which is used in the mounting for dishwasher front panel ( BEHJÄLPLIG )
Little 3D print to mount an action camera/GoPro to the chin bar of your HJC I90 modular helmet. I designed it so that the helmet stays fully functional, so you can still operate the chin vent, as well as the modular button part. I…
Printed in PETG with 15% infill and supporters.
Mahjong tile rack with rows for hidden and revealed tiles. Fits 20x14x10mm tiles Use the dovetail feature in prusaslicer (cut tool)
I printed few parts from original author and I found that the tip is very fragile. I remixed it to be more durable. Enjoy
The clip was broken and I couldn't find anywhere, so I decided to make this mount.
Parts for IKEA Behjälplig
I used a 3d scanner on my motorcycle helmet and I made a mount for the front for a GoPro, all you need is some permanent 3M tape. Plz lmk if it works or needs adjustment, this is my first model so post pics!
Ever want to have the rule card for Mahjong out on your table, but not have enough space on the table for everything? This handy card holder folds flat for easy storage but holds a rule card off the table. Sized for both the small and…
The mount follows exactly the lines of HJC RPHA11 Helmets, and has dedicated clearance to still open and close the air chin intake ! Although it may seem as the angle of the camera would be way too much towards the sky, it as absolutely…
Case for Arduino UNO and CNC shield V3, case has place for 50mm fan. Fastening holes are for V-slot rail (20mm), holes are for M5 screws. Other end has openings for Arduino UNO´s sockets and other end 10mm hole for power plug and slot for…
I know these hooks are only a Euro per three hooks at the Swedish furniture store, but it isn't open on Sunday evenings when I usually reorganize our stuff. They're easy to print with no supports. I'm printing them on their side (see…
This is a remix of nushipwright 's " Spot Welder Box (JQ-DHJ02B spot welder) " with a handful of improvements listed below. Increased wall thickness across the board from 1mm to 2.5mm making it far stronger Added 4x M3x8 screws to avoid…
Originally, I developed it for my own use, because as a quadriplegic, opening drink cans is at the very least a challenge. Opener can also be used to close the can from insects, just twist it clockwise. Measurements: Length: 70mm Width:…
Tenbou sticks for riichi mahjong. They're meant to be printed up-right (vertically) to preserve the cylindrical shape. You should be able to print as-is, but a brim may be necessary if you have issues with bed adhesion.
This is a tile rack for Mahjong . It fits tiles that are up to 33 x 44 x 23 mm. The rack is printed in parts that are connected using joints. I printed it with the short edge on the print surface, then it doesn't need any supports.…
🀄 🌬 Sometimes when playing Mahjong , the traditional Chinese tile board game, players need a token or marker to remember which Wind corresponds to them during that game. This design is friendly to non-Chinese speakers, as each tile is…
I designed this for my own use, I'm an C5 quadriplegic, so my hands and fingers are quite shittyshittybangbang, can't get grip of anythin heavy or slippery. This can be used to lift it with your thumb. Handle is slided down to it´s place.…
Action Cam ChinMount For HJC I71 (ORGINALLY MADE BY GREGLGOMEZ). I found it useful and it got deleted so here u go. I dont own this model. All credits to original creator greglgomez! This was the original link:…
I was building an enclosure for my MK3s+ with the Ikea Platsa cabinet and glass doors. Unfortunately, the only 60x60 cm glass door I found was the Enköping one (two 60x30cm doors), and there are no hinges that fit Platsa and Enköping…
Mahjong rack. Only fits 30x23x11mm tiles. Prints in 2 halves with hex pins on an Ender 3. Included the full model should you have a ridiculously oversized printer or just want to scale it down. <3
Fusion 360 lesson, one printed phone stand (ctrl design), and mainly because I´m an wheelchair user, it was clear what I wanted to do. This is a first model I have made and when it´s printed, it need adjustments, that´s why it´s v1. But…
A riichi mahjong compass suitable for use the larger, Chinese, mahjong tiles
A compass for Riichi Mahjong with cursive or AMOS modern font and wall break number indicator. To print the compass in multicolor, change color for the top 2 layers assuming you are using 0.2mm layer height
I made several mahjong tiles to be keychains for a present. Because I do not a multicolor printer I wanted them to be able to be printed in different colors using filament layer changes. I made 6 different tiles. 1. Red Dragon Tile 2.…
Helm of Awe rune I made on fusion 360, love Nordic mythology. It's 10 diameters and the spokes are ¼ wide and 5/16 tall. Adjust to your build plate and desired size/ thickness. I recommend printing with a brim. Helm of Awe is a Nordic…
Action camera helmet mount to fit the HJC RPHA 90S helmet.
Here is my GoPro mount for my HJC RPHA 71 helmet. This is the 7th version I've created, and it's by far the best one yet—quite sleek with excellent adhesion to the helmet. preview : https://youtu.be/MG_Sxr9S8nc (GoPro Hero+)…
Print in PETG or stronger. I printed mine in Prusament PETG @0,20mm height on a Prusa Mini+. It's still going strong after a year.
Rod holder for the HJÄLPA Clothes rail [compatible with PLATSA storage solution] (503.312.05 / https://www.ikea.com/nl/en/p/hjaelpa-clothes-rail-white-50331205/ / not available anymore unfortunately). This design allows you to easily…
A dealer marker is used throughout the game to either indicate the current dealer, or the initial dealer. In the case of the latter, the dice are used to indicate the current dealer, as it gets passed around from one dealer to the next.…
Compass for riichi mahjong. Slot is for standard scoring sticks (65 x 7 x 4 mm). Tiles on the picture are AMOS 28 mm (28 x 21 x 16.5 mm). You can make compass bigger or smaller depending on tiles you are using. Compass size is 130 x 130 x…
Holder/bracket for Nema 17 stepper motor. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes arre for M4 screws. Measurements: Height: 48mm Width: 47mm Length: 82mm Max stepper length: 56mm (motor can be longer if…
🇺🇦 Українська версія (🇬🇧 scroll down for English) Це корпус для MeshJoy — портативного пристрою Meshtastic або Meshcore. ⚠ Важливо: я надаю Вам модель безкоштовно, разом із джерельними файлами. Продаж друкованих копій або похідних…
LedStrip Light Bar for Creality Ender 3. Width is calculated so spool holder has room on the frame. Tested on CR-10S also and light amount is quite okay (LED Strip 4,8W/m). Frame has two thicness versions, 10mm and 12mm. There isn´t big…
We play Mahjong every Saturday, or should I say we are learning. This model is a rack I designed and printed which can be used to hold the tiles, melds and to build the wall. The black line is just a color change to allow players to fit…
Star Wars faces for thjelmfelt's Jack O'Lantern with Snap On Faces https://www.thingiverse.com/thing:2590046 As seen on Chris Pirillo's twitch stream early Oct 2021 Models should print without supports. To be used with the awesome snap on…
You can easily resize it in Prusaslicer to whatever dimensions you like. I made this in blender, so dimensions won't be right anyhow. Add a color change pretty low in the model to get the classic mahjong split color tile effect. Goes…
Case for LM317 voltage regulator with strain reliefs. Size: H40xW22xL68mm Fastening holes: 2x4,2mm Strain relief holes: 4x2,8mm (use M3x5mm screws) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
Improved chamfers for the bolts in the style of Mr. Mestro on YouTube (for flawless threads).
I have drawn up this simple box to protect the bare PCB "DIY" spot welder from possible shorts while operating with it as well as to add forced air cooling to the mos-fets on board. There are 4 separate STL files two of which will need…
Printed in PETG, 100% infill for stability.
This was a commisioned design for my father who asked me, if I could print him some wind indicators he wanted to give away as presents. As I am not playing Mahjongg, I cannot further explain the use of this. The cube can be inserted into…
Chin mount for HJC F70 helmet and gopro fixation
A bigger Drawer for the Suzuki Jimny GJ/HJ. Print with PETG or better.
These hinges are made for acrylic door. I designed parts for IKEA Lack enclosure and it needed hinges, where doors are 13mm depth from feet surface. Measurements: Height: 50mm Width: 60mm Holes: 4,5mm Countersink: 8mm Female part depth…
Simple replacement screw for a HJC CL16 helmet screw. They are a standard M6 thread but with a large flat head. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 20 Filament: NA PETG…
Alternative mount for the ikea HJÄLPA which I use for filament storage in my PLATSA enclosure. You can use the screws supplied with the HJÄLPA they fit very snuggly into the holes. The included gcode prints 2 of the mounts at 0.20mm layer…
I downloaded mahjong tiles from https://www.thingiverse.com/thing:4967487 This ruler is made for 30* 22 * 11 mm size mahjong tiles. One for 13 tiles game and one for 16 tiles game. 麻將牌尺，分別做了適合13張及16張的，可折疊，適合30*22*11mm大小的牌
A holder thats fits the Ikea Hjälpa clothes rod.
!!!!! NOCH IN ERPROBUNG !!!!! STILL IN TEST !!!!! DEUTSCH: Ich habe hier für Motorrad Helme der Marke HJC einen Atemabweiser konstruiert da die dinger immer verlohren gehn. Er sollte in folgende Modelle passen: IS-16, FG-15, FS-11, FS-15,…
Being a Chemist and someone that is US DOT HazMat certified I enjoyed seeing Lurther's original print. Since I have a MMU2 I prefer to print signs as a single layer instead of color by layer height so I had to remake this into a MMU…
Measurements: Height instep: 100mm Width leg: 97mm Adjustment: 247-280mm (EU38-43 | US 5-8,5) Fastening screw M3x14mm. Nuts (M3) are inserted in the knobs mid print. Rafts: No Supports: No Resolution: 0.20mm Infill: 15% Perimeters: 4…
This is my modern take on the traditional Danish Christmas ornament, the "Julehjerte" (literally "Christmas heart"). It's a classic piece that brings a touch of Scandinavian charm to your holiday decor, with a twist of modern flair. The…
With Creality CR-10S Pro came 0,2mm feeler gauge, but I lost my nerves using it with my shittyshittybangbang fingers, so I designet handle for it. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
Perfectly fitting chinmount for the HJC RPHA90S and RPHA90.
I have often come across this 2 player game on Tiktok or Instagram where 2 players have a battle with Mahjong tiles to see who completes their playing field first. Since I didn't want to spend €70 or more on the stones, I thought I'd just…
This is the design of Dany Sánchez , but I added the Arabic and Chinese numbers, since my play-mates sometimes cannot remember which wind is which number. To get nice contrast between the characters and the base of the token, you can…
I've created this model to cover sharp corners of Hjalpa hinges compatible with Ikea Hjalpa. Works for soft closing hinge too. Model is designed to clip on with a cutout for for adjusting screw. You can additionally fix it with hot glue.…
This Zentralscheibe is specifically designed for the BuschJaeger Future Linear collection to fill the gap around the Shelly Blu Button, creating a sleek and seamless look. Whether you're upgrading or customizing your smart home setup,…
I got a second hand Sena SMH10R headset that was missing the battery clip so I made my own. In this case fitted on an i90 helmet, but it should fit any HJC helmet that is prepared for use with Smart HJC. Keeps the battery for the Sena…
Action Camera chin mount specifically for the HJC RPHA 71. I have also added the helmet mesh, for anyone who might want to design their own mount. If you want to modify the original file, you can do so on onshape here:…
Designed holder for small outdoor lantern, printed with PETG. There is two versions, first has 4mm horisontal and vertical frame and second (thick) 6mm. Lantern Holder: 200x203x20mm Holes 4,2mm Print Settings Printer Brand: Creality…
Helmet Visor Screw HJC form Visior
this is a Ikea Hjälpa hinge plate replica. It works but will not last long on heavy doors. I hope it helps someone fix the cabinets ;) for assembly you can use the old 3mm pins from the original part. If these are lost, other 3mm screws…
Simple stand for Metabox Alpha N850HJ laptop, might work with other Metabox/Clevo models Also there is gluing involved, if printed in PLA then recommend using super glue
this is a Ikea Hjälpa hinge plate replica with enlarged mounting plate. In the case that the chipboard door has already torn out. It works but will not last long on heavy doors. I hope it helps someone fix the cabinets ;) for assembly you…
Needed something for my Mahjong set but could not find anything I like. Category: Dice
Mahjong Garden Gnome Bring a little luck, strategy, and playful charm to your collection with this Mahjong Garden Gnome ! Featuring a cheerful bearded gnome holding a large Mahjong tile, the model is decorated with sculpted tile symbols…
Mahjong D4 (four-sided) dice with the 4 winds. Only one character is correctly oriented at a time, so you can tell which wind is “up”. Two versions are available: pointy or rounded edges. Update: Included support to hold the current wind…
I printed these face down in two parts using the filament swap method. The details of the characters are quite small, you may need to print it larger or increase the layer thickness or flow rate to get it to stick. Drop the disc file and…
A 3D scan of the HJC C10 motorcycle helmet's chin bar, which you can use to make custom attachments. The 3D scan has been cleaned up, meshed, decimated down to a manageable triangle count, and made solid so that slicers can work with it…
This part will help you Hack an Ikea BESTÅ to fit an HJÄLPA Rack into it. Simple and straight forward. Won't fit with the original metal breaket as HJÄLPA is made for another System. The Bracket will collide with the hindge of the Besta…
I´m a big fan of Raspberry PI model 3 case for 40mm double V-slot rail with 40mm fan. I couldn´t attach it to my CR-10S Pro´s frame, so I made this design what I install on my printer cabinets wall. Rail: 40x10x92/152/202mm Rail holes:…
IKEA Behjälplig (Behjalplig) is the only solution to install non-IKEA dishwasher into IKEA METOD kitchen cabinet, but unfortunately this thing will snap/break very easily almost weekly. This part prevents bottom part to snap from the…
I used PrusaSlicer to paint on a different filament. gcode files use extruder 1 as main color and extruder 2 as accent (border and character). Colors in photo: East: Prusament Opal Green, Made for Prusa Pearl White South: Made for Prusa…
Helps focus a standard Mahjong card on one line. Fits perfectly so that card can slide up and down
Idea of this is hold 10m+ hose and two pneumatic tools, what are hanging on those 30mm long slots from connector. Space for hose is way too big (can fit 20m 3/8), but I hate if holder is too small and hose won't stay well. Black part is…
Like there isn´t enough IKEA Lack things in Thingiverse, I couldn´t find suitable for my project. I´m making printercabinet with 2+2 IKEA Lack tables and upper ones are having 12mm/16mm chipboard walls. These brackets have room for those…
Hallo, ich habe einen Halter für das IKEA Scharnier HJÄLPA konstruiert. Wenn die original Schrauben aus dem Holz gerissen wurden. Er wird einfach über das Scharnier gesteckt und mit handelsüblichen Senkschrauben D=3.5mm festgeschraubt.…
A simple christmas ornament :) Print Settings Printer Brand: Creality Printer: Ender 5 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 20 Category: Decor
Holder for screwing down the power supply on a board. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Notes: If you use Prusa Slicer, the included project already has the necessary…
Denne mærkat monteres direkte på luftventilen for at angive dækkets placering, f.eks. venstre forhjul (VF) eller højre baghjul (HB).
