Spot Welder Box (JQ-DHJ02B spot welder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box for protecting the spot welder
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 124
- Makes
- 1
- Views
- 1,791
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I have drawn up this simple box to protect the bare PCB "DIY" spot welder from possible shorts while operating with it as well as to add forced air cooling to the mos-fets on board.
There are 4 separate STL files two of which will need support of some sort. I have included screenshots for them.
I have also included a STEP file if anyone wants to tweak it further.
Link (not affiliate) to the JQ-DHJ02B spot welder used: https://a.aliexpress.com/_uWDuxh
You will need 4 pieces of small aluminium heat-sinks used for 3D printer stepper driver board cooling. Attach those to the mos-fets both on top and on bottom of the PCB.
You will also need a 24V 40x40x10mm fan and solder its leads directly to the power input.
The fan running constantly at a lower than nominal voltage results in a relatively quiet operation yet it provides more than enough air-flow for cooling the high current switching mos-fets.
Hopefully this mod will extend the life of my spot welder.
If you like the design please show it by clicking the like ♥ button.
You can also donate if you find this useful. Thank you!