1 / 9
Case for Heltec V3 T114 + GPS + Li-Po 103665 + Belt Clip (NO SCREEN) — zdjęcie 1
1 / 9

Case for Heltec V3 T114 + GPS + Li-Po 103665 + Belt Clip (NO SCREEN)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wider back for Meshnology 3000mAh 103665, tighter GPS fit, closed screen slot, heat inserts for assembly and belt clip.

Ocena
0 / 5
Polubienia
5
Pobrania
63
Wydruki
0
Wyświetlenia
476
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
  • Want to Support me?

    • Post a Make

    • Give it a Like

    • PayPal

    • Venmo: @paulorfo

    • Cash App: $paulorfo

-------------------------------------------

About:

Remix of the original Heltec T114 + GPS + Li-Po case, reworked to fit the Meshnology 3.7V 3000mAh Li-Po battery (103665). The original back section was too narrow for this cell — the back has been widened to accommodate it properly.

The GPS module pocket was also adjusted for a proper friction fit; on the original, the GPS sat loose inside the case.

The screen cutout has been closed, intended for headless Meshtastic builds where no display is used.

Assembly hardware:

  • 1× M3×3×4.2 heat insert + 1× M3×14mm screw to join front and back halves

Belt clip (optional):

  • 2× M3×4×5 heat inserts + 2× M3×8mm screws

Heat inserts are installed with a soldering iron. The result is a more robust closure that can be opened and reassembled multiple times without wearing out the.

Compatible with: Heltec Wireless Tracker V3 (T114) (NO SCREEN) + GPS module + Meshnology 103665 Li-Po

-------------------------------------------

  • If you found this helpful, please give it a like - it really helps!

  • Even if it wasn't perfect, leave a comment with your thoughts.

  • I read them all and use your feedback to improve future updates.

-------------------------------------------

Tagi